XCMG 25 ton flat top tower crane XGT600-25S with 80m jib length tower crane.

XCMG 25 ton flat top tower crane XGT600-25S with 80m jib length tower crane is made of first-line brand steel, and the boom, swing and balance arms are made of Q460C and above high-strength steel, the strength level is the highest in the industry, and the structural strength of the whole machine is guaranteed.

Features:

1.The first-line brand steel of the whole machine, the boom, swing, and balance arms are made of Q460C and above high-strength steel, with the highest strength grade in the industry, ensuring the structural strength of the whole machine;

2.The safety factor of the whole machine exceeds the European standard, reaching 1.5-2.0 times the rated load;

3.The whole machine will not fade in three years, and will not rust in five years. It is more suitable for areas such as high cold, damp heat, and coastal areas, and the coating quality is industry-leading;

4.The cab is not corroded for ten years, and the field of vision is wide. The electrophoresis + spraying process of the whole machine. The external unit of the air conditioner is built-in, which reduces the failure rate of the air conditioner. The disassembly and assembly of the whole unit, and the installation and transportation of the air conditioner are free of disassembly, which improves the convenience and maintainability;

5.The whole machine is modularized and packaged for transportation, saving transportation vehicles and saving costs;

6.The main structural parts are installed by four cranes, and the whole machine is installed and disassembled and debugged in half a day, which improves the efficiency of installation and disassembly and saves the cost of installation and disassembly;

7.High-reliability, full-hardened gear reducer is not out of the box for 10 years, and the bearing of the whole machine is maintenance-free for 5 years. The failure rate is low and the maintenance cost is reduced.

More Flat Top Tower Crane