SG210/A2 Type Water Tank Fire Truck   
1. As the first truck to be deployed, it must be furnished with required crew quantity. Therefore, a four-bridge chassis with a double-row four-door and a six-passenger cab is configured to meet the requirements. Chassis uses CNHTC ZZ5437V4667D5 type Ⅱ chassis, maximum speed not less than 95 km / h; use of 309KW engine, taking into account the contradiction between price and specific power, endows the truck with both advantages of good cost performance and large specific power, as well meeting requirements of the national IV emission standards.
2. Fire fighting system configuration: HALE·RSD fire pump and PSKD80 electric control fire monitor manufactured by WST (Chengdu) enable the truck not only to adapt for the working condition where low pressure and large flow is required, but also to cooperate with water tower fire truck to carry out fire fighting for high-rise buildings.
3. Self-protective spraying system: in recent years, more and more attention has been paid to the self-protective spraying system, so the truck is also provided with self-protective spraying system mounted at the top of cab and tire to effectively improve adaptability of the truck against the fire field.
4. This truck is equipped with 21,000 kg water tank which can support fire fighting operation in a location far away from the water source or allow the truck to work independently.

Description		Unit	Parameter value
Overall length		mm	11850
Overall width		mm	2500
Overall Height		mm	3660
Full mass		kg	40000
Max. Speed		km/h	≥95
Min. Turning diameter		m	≤26
Approach angle			≥16°
Departure angle			≥11°
Maximum gradeability		%	≥25
Front and rear suspension	Front suspension	mm	1500
	Rear suspension		2600
Fire fighting system	Pump rated flow	L/s	80
	Pump rated pressure	MPa	1.0
	Monitor model		PSKD80W
	Monitor rated flow	L/s	80
	Monitor rated pressure	MPa	1.0
	Monitor shoot range	m	≥80