.jpg_t.jpg)
.jpg_t.jpg)
Summary
- Certification:CE/ISO9001
- Weight:60t
- Usage:Ore
- Model Number:XR180DII
- Brand Name:XCMG
- Place of Origin:China
- Power Type:Diesel
- Type:Rotary Drilling Rig
Specifications
- weight:60000.000kg
- Condition:New
- Moving Type:Other
XCMG Official Hydraulic Rotary Drilling Rig Machine XR180DII.
XR Series Rotary Drilling Rig stands for our company's achievement in many years' development and researches on piling machine, adopting the advanced technology, both at home and abroad. With our company's powerful machinery manufacturing capacity, it is specially designed to drill the pile hole with the big diameter and into hard—layers, fitting for layer conditions in most areas.
XCMG XR180DII Rotary Drilling Rig widely used in boring operation of bored concrete pile in foundation engineering of highway, railways, bridges, ports, docks and high-rise buildings.
Performance Characteristics:
* With the special hydraulic telescopic crawler chassis (TDP series) of rotary drill rig and large diameter slewing bearing, it meets strong stability and easy transportation.
* With the electronically controlled and turbocharged engine of Cummins, which is powerful and emissions meet Euro Ⅲ standards.
* The hydraulic system adopts the limit of power control and positive flow control, that makes the hydraulic system more energy and efficient.
* With the single rope main winch, it efficiently solves the problem of wire rope wear, and improves the service life of wire rope; a detection device of drilling depth on the main winch, and single rope makes deep inspection more accuracy.
* The design of whole machine meets the requirements of the CE directive, that guarantees safety, and construction safer.
* Configure centralized lubrication system, which makes maintenance more convenient.
* Selection of a variety of specifications for Kelly-bar, meeting the efficient construction of different strata.
* Multi-function such as crowd winch, spin-off of rotary drive, casing driver and hydraulic casing oscillator is optional selected.
* The removable type key of rotary drive makes maintenance and exchange more convenient.
Description | Unit | Parameter value | ||
Max. drilling diameter | mm | 1600 | ||
Max. drilling depth | m | 60，Standard configuration (5-section friction Kelly bar) 46，optional configuration (4-section-locking Kelly bar) | ||
Allowable luffing scope (from center of drill rod to slewing center) | mm | 3560～3900 | ||
Drilling rig dimension in working condition (L × W × H) | mm | 8350×4200×20480 | ||
Drilling rig dimension in transport condition (L × W × H) | mm | 14380×3000×3490 | ||
Weight of overall unit (standard configuration, excluding drilling tool) | t | 60 | ||
Engine | Model | CUMMINS QSB6.7 | ||
Rated power/speed | kW | 194/（2200r/min） | ||
Max. working pressure of hydraulic system | MPa | 35 | ||
Rotary drive | Max. torque | kN •m | 180 | |
Rotational speed （Standard configuration） | r/min | 7～27 | ||
Rotational speed （Optional configuration） | r/min | 6～25 | ||
r/min | 92（Spin-off） | |||
Crowd cylinder | Max. Pushing force | kN | 210 | |
Max. Pulling force | kN | 210 | ||
Max. stroke | mm | 13000 | ||
Main winch | Max. pulling force | kN | 180 | |
Max. single-rope speed | m/min | 65 | ||
Diameter of the steel wire rope | mm | 28 | ||
Auxiliary winch | Max. pulling force | kN | 50 | |
Max. single-rope speed | m/min | 70 | ||
Diameter of the steel wire rope | mm | 16 | ||
Drilling mast | Left/right inclination of mast | ° | 3/3 | |
Front/back inclination of mast | ° | 5/15 | ||
Rotary table slewing angle | ° | 360 | ||
Traveling | Max. traveling speed of the overall unit | km/h | 1.5 | |
Max. climbable gradient of the overall unit | % | 35 | ||
Crawler | Width of crawler plate | mm | 700 | |
External width of crawler (min.-max.) | mm | 2960～4200 | ||
Center distance between two longitudinal wheels of crawler | mm | 4270 | ||
Average ground pressure | kPa | 94 |  .jpg)  | |
.jpg)
