weight

Axles

1

2

Total weight

Kg

15100

15200

30300

Hook

No.of sheaves

Remarks

55t

6

Single hook

4t

0

Single hook

Working speeds

Km/h

20.5R 25

38

55%

Drive

Working speed

0-120   m/min, no load, 4th layer,

0-120   m/min, no load, 4th layer

0-2.5    r/min

Approx. 65s for boom elevation from -1.5° to 80°

Approx. 85s for boom extension from 10.1m to 32m

XCMG——RT35

Technical specifications

Frame

Turntable and frame are made of fine grained high strength steel, with anti-torsion large cross-section frame structure, has heavy loadbearing capacity.

Boom

I basic boom and 3-telescoping sections, dodecagon cross section welding structure. Single-cylinder plus ropes telescoping mechanism is fbr synchronous telescoping.

5 pulleys on boom head are standard. Boom length: 10.1 m ~ 32m.

Outriggers

 4 outriggers, H-shaped arrangement, which are controlled by electrical and hydraulic and located at both sides of chassis frame. Front and rear towing brackets are available.

Operator's cab

Integrated design, appearance is simple and artistic, equipped with all-weather and large arc glass, which has a wide vision, as well as spacious and comfortable due to ergonomic inner design.

Engine

QSB6.7-C 190-30, in line six-cylinder water- cooled compression ignition diesel engine, manufac-tured by DCEC, CHINA, rated power 142kW/2200rpm, max. torque 931Nm / 1400rpm, off-road EU Stage IIIA emission standards.

Fuel tank capacity : Approx. 300L

Safety devices

Hydraulic balance valve, Hydraulic relief valve, Hydraulic double-way valve, LMI., Lowering limiter avoids wire rope overreleasing. Anti-two block at boom head avoids wire rope over-winding.

Hydraulic system

The constant delivery pump is connected to the transmission through PTO for controlling the movements of crane.

Oil tank capacity: Approx. 500L.

Counter weight

Total weight is 4t, fixed counterweight,

Operating mode

Hydraulic proportional controlled operation sys-tem is equipped with two electric proportional control the main movements of crane.

Electrical system

DC 24 volts is in series with two 12-volt battery packs.

Gearbox

6WG260, automatic transmission imported from ZF Germany, with 5 forward and 3 reverse gears available.

Auxiliary which system

Driven by hydraulic motor through planetary gear reducer and with built-in constant closed brake, equipped with anti-winding wire rope.

Axles

Exclusive axles imported from Xuzhou Meritor, with both front axle and rear axle for driving and steering.

Jib

2-section,lattice and box welding structure, withO0 ,15° and 30° jib offset angles available.

Jib length:8.5m ~ 15m.

Suspensions

Front axle is connected with frame rigidly, swing rigidly lockable hydraulic suspension is used for rear axle. Road shock is buffered and

travel smoothness is improved when driving on roads, the rear suspension cylinder may be locked to rigid state so as to meet the requirement for travel with a load suspended.

Air conditioner

Equipped in the cab, for improving comfortable performance.

Tires

4 tires, each axle is equipped with single tire, large bearing capacity.

Tire specifications:20.5R25.

Slewing system

 Single-row four-point ball contact slewing ring, driven by hydraulic motor through planetary gear reducer and with built-in constant closed brake, for 360 ° continuous rotation.

Steering

Paralleled full hydraulic multi-mode steering: front axle independent steering, small turning radius steering, crab walk steering and rear axle independent steering are available.

Main winch system

 Driven by hydraulic motor through planetary gear reducer and with built-in constant closed brake, equipped with anti-winding wire rope, having features of high speed with light load and low speed with heavy load.

Brakes

Service brake: double-circuit hydraulic disc brake, acting on all wheels. Automatically braking function works when the pressure in braking system is too low.

Parking brake: spring-loaded brake, acting on front axles, hydraulic-released independent disc brake.

Product parts list is as mentioned above, please refer to the product quotation for specific parts.

XCMG——RT35