Specifications
- weight:18.000kg
XCMG HV Hydraulic Oil 46 18L
XCMGAW Hydraulic Oils are premium quality antiwear lubricants specially designedfor XCMG machinery. Especially suitable for high and medium pressure hydraulicsystems of XCMG EXCAVATORS, CRANES and other construction machinery.
Better low-temperature fluidity and provides excellent low-temperature start up compare with XCMG AW line.
Outstanding anti-wear properties, rust protection, low varnish and deposit formation, excellent demulsibility, oxidation resistance, good antifoam properties and fast air release properties, to protect and extend the life of hydraulic pumps and systems.
Good hydrolytic stability and filterability, ensure optimum product life and performance, and prevent filter blocking.
Fully compatible with common seal materials usually found in hydraulic systems, to extend seal life and prevent fluid leakage.
Moderate- to high-pressure hydraulic systems operating outdoors in severe cold regions or where there is a wide variation in ambient temperature, such as in the marine, construction, mining and oil-industries.
Vane and gear pumps operating under high pressure and low temperatures, as recommended by pump manufacturers.
Severe service hydraulic systems, employing axial and radial piston pumps, as recommended by pump manufacturers.
ISO viscosity grade | 68 |
Kinematic viscosity, ASTM D 445 | |
cSt @ 40℃ | 68.16 |
cSt @ 100℃ | 9.17 |
Viscosity index, ASTM D 2270 | 110 |
Air release at 50℃, mins, ASTM D 3427 | 8 |
Foaming characteristics, | 5/0 |
sequences 1, 2 and 3, ASTM D 892 | 10/0 |
5/0 | |
Neutralisation number, mg KOH/g, ASTM D 974 | 0.71 |
FZG test (A/8.3/90), fail load stage FZG, DIN 51345 | 12 |
Rust prevention, ASTM D 665 | |
distilled water | pass |
synthetic sea water | pass |
Copper corrosion, 3-h @ 100℃, ASTM D130 | 1b |
Water separability, ASTM D 2711 | 10(54℃) |
Pour point, ℃, ASTM D 97 | -21 |
Flash point (COC), ℃, ASTM D 92 | 234 |
XCMG AW Hydraulic Oil meets the performance | |
DIN | 51524 Pt 2 |
ISO | 11158 (L-HM) |
Cincinnati Lamb | P-69 (ISO 68), P-70 (ISO 46) |
Parker Denison | HF-0, HF-1, HF-2 (ISO 46, ISO 68) |
Eaton Vickers | M-2950-S (ISO 46) |