Specifications
- weight:200.000kg
- Condition:New
- Boiling point, ℃, ASTM D 1120:112
- Freezing point, ℃, ASTM D 1177:-46.2
- pH, ASTM D 1287:8.5
XCMG EnvironmentallyFriendly Engine Coolant 200L
XCMG Environmentally Friendly EngineCoolant is a premium quality engine coolant specially designed for XCMGmachinery. Utilizing the advanced environmentally friendly organic-acid basedcorrosion inhibitors technology, it is suitable for all engines equipped byXCMG machinery, such as OFF-ROAD WHEEL CRANES, AUTO CRANES, CRAWLER CRANES,EXCAVATORS, GRADERS, LOADERS, ROLLERS, and etc. Caution: XCMG EnvironmentallyFriendly Engine Coolant is not suitable for use in vehicles that contain zincor zinc-alloy type components in the cooling system, for example earlier modelsof Holden Commodore in Australia.
Colour, visual | Red |
Specific gravity @ 20℃, kg/m3, ASTM D 1122 | 1080.0 |
Boiling point, ℃, ASTM D 1120 | 112 |
Freezing point, ℃, ASTM D 1177 | -46.2 |
pH, ASTM D 1287 | 8.5 |
Foaming of engine coolants, ASTM D 1881 | |
Volume, ml | 30 |
Break time, sec | 1.8 |
Effect on automotive finish, ASTM D 1882 | No effect |
Corrosion test for engine coolants in glassware, weight loss, mg/specimen, ASTM D 1384 | |
Copper | 1.4 |
Brass | 1.0 |
Steel | 0.8 |
cast iron | 1.6 |
Solder | 2.0 |
Aluminium | 1.6 |
Simulated service corrosion test of engine coolants, weight loss, mg/specimen, ASTM D 2570 | |
Copper | 2.2 |
Brass | 2.6 |
Steel | 1.2 |
cast iron | 2.4 |
Solder | 3.2 |
Aluminium | 2.4 |
Corrosion of cast aluminium alloys in engine coolants at heat transfer surface, mg/cm2/week, ASTM D 4340 | 0.32 |
Cavitation corrosion and erosion-corrosion characteristics of aluminium pumps with engine coolants, rating for pitting, cavitation and erosion of the water pump, ASTM D 2809 | 9 |
Industry and OEMspecifications
XCMG Environmentally Friendly Engine Coolant 9 meets the performance requirements of the following industry specifications | |
ASTM | D 3306, D 4985 |
BS | 6580:2010 |
JIS | K 2234 |
SAE | J1034 |